How to design the size of the entrance door

2022-07-22
  • Detail

Generally speaking, the entrance door is the first door to enter the house. This door needs to be carefully selected and installed. When installing, it can be implemented according to the actual situation and personal preferences, but when choosing, because the door is large and small, we must grasp the size. The following editor will talk about how to design the size of the door and the introduction of the size of the door

generally speaking, the entrance door is the first door into the house, which needs to be carefully selected and installed. When installing, it can be implemented according to the actual situation and personal preferences, but when choosing, because the door is large and small, we must grasp the size. The following editor will talk about how to design the size of the door and the introduction of the size of the door

I. Introduction to the size of the entrance door

nowadays, the doors installed by everyone are generally anti-theft doors, and they all have standard sizes. Generally, the standard entrance door sizes are 865mm and 950mm, 2050mm and 1770mm high. When the size of the entrance door is reserved, it should be increased by 20mm and 25mm wide. The size of the child and mother door is 1170mm wide and 2050mm high, and the reserved door should also be widened by 25mm and 20mm high

II. How to design the size of the child and mother door of the house

1. Ordinary residence: the size of the child and mother door used by ordinary residence is 1200mm× 2000mm。 The width of the unit door cannot be < 2000mm, height not < 2200mm。 The double opening size of yard doors in rural areas is usually 1.5m or 1.8m. Their key consideration is that the finished door can be bought in the market according to this size, and the door with non-standard size is particularly cumbersome to do. But if you want to park in the yard, it should be calculated according to the width of your car, but at least 2.1m above

2. Commercial housing: the width of single door is 1.2m to 1.5m, and the width of double door is 1.8m or about 2m. Everyone should know the height. The height of rural bungalow is 2800mm and the width is 2600mm. For the entrance door of commercial housing, the child and mother door can be considered, with a height of 2050mm and a width of 1260mm

3. Villas: usually there are two gates, the courtyard gate and the entrance gate. Obviously, the width of the gate of the villa yard should be determined according to the villa area and building structure. For some yards with large area, the width of the villa gate can reach 3 meters and 4 meters. The height is not limited. At present, there are two most commonly used sizes of villa entrance door, 1.2m*2.5m and 1.5m*3m

III. standard size of the entrance door

as the entrance door is divided into two types: inside opening and outside opening, the reserved height shall be 30mm. Usually, it cannot meet the fine decoration requirements of residents, because different ground materials used by the owner in the secondary decoration have different requirements for the flatness of the leveling layer. The thickness of wood floor and ceramic tile also directly affects the accuracy of reserved holes. The same indoor and outdoor decoration must be used at the operation site, and the horizontal standard height of installation is 1m line or 0.5m line, so as to meet the level control requirements of the construction of doors and windows, floors, etc

summary: the above is the relevant knowledge about how to design the size of the door and the introduction of the size of the door. I hope I can help you! If you still don't understand or want to know more about relevant aspects, please continue to pay attention

成都糖尿病医院

北京男科医院

成都皮肤病医院

长沙骨科医院

Copyright © 2011 JIN SHI